TM 9-2350-222-10-3
MAINTAIN PERISCOPES (REMOVE PERISCOPE BODY) - Continued
To Remove M32CE1 Daylight Body:
Make Sure:
q MASTER BATTERY switch (A) is set to OFF.
q ELEV/TRAV POWER switch (B) is set to OFF.
CAUTION
Optical equipment is very fragile and should be
handled with care. When removing, make sure
you always have a firm hold to prevent dropping.
Take care not to touch lenses with your fingers.
1. Hold daylight body (C) firmly with left hand.
NOTE
Rear latch is behind daylight body.
2. Release two latches (D) (one front,
one rear).
3. Lower daylight body (C) carefully
down from periscope head (E).
TA252976
3-210.2 Change 1
