TM 9-2350-222-10-3
MAINTAIN PERISCOPES (REPLACE LAMPS) - Continued
To Replace Lamp in M36 Daylight Body:
1. Slide lampholder (A) from dove-
tail slot on daylight body (B).
2. Unscrew lamp housing (C) and
remove.
3. Remove bad lamp (D) by
pressing and turning counter-
clockwise.
4. Get good lamp (D) from
spare lampbox (E).
5. Install good lamp (D) into
lampholder (A) by pressing
and turning clockwise.
6. Screw lamp housing (C) on lampholder (A).
7. Replace lampholder (A) on dovetail slot on daylight body (D).
8. Put daylight body into operation (page 2-349) to check lamp. If
reticle lights, dispose of bad lamp. If reticle does not light, notify
organizational maintenance.
TA133059
