TM 9-2350-222-10-3
MAINTAIN PERISCOPES (REPLACE LAMPS) - Continued
To Replace Lamp in M32CE1 Passive Body:
NOTE
Light source control (A) is lo-
c a t e d behind M32CE1 peri-
scope (B).
1. Set light source control knob (C) on
light source control (A) to OFF.
2.
Turn lampholder (D) approximately
1/4 turn.
3.
Pull lampholder (D) with burned out
lamp (E) from passive body (F).
4. Push in on lamp (E) and turn to
loosen.
5. Pull lamp (E) from lampholder (D).
TA252992
Change 1 3-228.3
