TM 9-2350-222-10-3
MAINTAIN TURRET (SERVICE EQUILIBRATOR HYDRAULIC
RESERVOIR) - Continued
5. Reinsert dipstick (D) and check fluid level.
NOTE
To add hydraulic fluid (F) to hydraulic reservoir (E),
pour fluid (F) into dipstick hole.
6. If fluid level is below ADD OIL mark on dipstick (D), add FRH
hydraulic fluid until level is at FULL mark on dipstick, Do not overfill.
7. Replace dipstick (D)
into hydraulic reservoir (E).
8. Turning handle (C)
clockwise, close
drain valve.
TA133093
3-263
