TM 9-2350-222-10-3
MAINTAIN TURRET (SERVICE EQUILIBRATOR HYDRAULIC
RESERVOIR) - Continued
9. Turning handle (G) one turn counterclockwise, open charging valve.
10. Watching pressure gage (A), pump handle (H) up and down until
gage reads 1500-1800 psi with main gun fully elevated.
11. Turning handle (G)
clockwise, close
charging valve.
12. Elevate and depress main gun (page 2-502) several times to
make sure pressure stays at 1500-1800 psi. If pressure continues
to drop below 1500 psi, notify organizational maintenance.
TA133094
3-264
