TM 9-2350-277-10
ASSEMBLE T130 TRACK SHOE SECTIONS OFF VEHICLE
THIS WORK PACKAGE COVERS:
Assembly (page 0094 01-1).
INITIAL SETUP:
Personnel Required
Maintenance Level
Driver
Operator
Helper (H)
Tools and Special Tools
Equipment Condition
Crowbar (WP 0102 00, Table 2, Item 13)
Track on level surface
Drive Pin Punch (WP 0102 00, Table 2, Item 44)
Grease Gun (WP 0102 00, Table 2, Item 25)
Hammer, 2 lb (WP 0102 00, Table 2, Item 26)
Industrial Goggles (WP 0103 00)
Adjustable Wrench, 1-5/16 inch (WP 0102 00, Table
2, Item 64)
Socket Wrench, 11/16 inch (WP 0102 00, Table
2, Item 49)
Track Fixture (WP 0102 00, Table 2, Item 23)
Wrench Handle (WP 0102 00, Table 2, Item 30)
ASSEMBLY
NOTE
Track shoe sections may come in 7 or 8 shoes per section. Make sure to count the number of
shoes during assembly. For all M113A3 FOV there are 63 track shoes required for the left
side and 64 track shoes required for the right side. Inspect each track shoe to see if anything
is wrong before it is assembled.
1.
Match two sections of track. Have helper assist.
2.
Remove nut from track pin. Use 1/2 inch drive socket handle and 11/16 inch socket.
Change 4
