TM 9-2350-277-10
SERVICE BILGE PUMPS
THIS WORK PACKAGE COVERS:
Servicing Front Bilge Pump (page 0096 00-1).
Servicing Rear Bilge Pump (page 0096 00-5).
Operational Check (page 0096 00-6).
INITIAL SETUP:
Personnel Required
Maintenance Level
Operator
Driver
Helper (H)
Tools and Special Tools
Cross Tip Screwdriver (WP 0102 00, Item 45)
Flashlight (WP 0104 00, Item 9)
Socket Wrench Handle, 1/2 inch drive
Equipment Condition
Socket Wrench, 1/2 x 3/4 (WP 0104 00, Item 49)
Engine stopped
SERVICING
FRONT BILGE PUMP
1.
Lower trim vane. See task: LOWER/STOW TRIM VANE (WP 0039 00).
2.
Open power plant access door. See task: OPEN/CLOSE POWER PLANT ACCESS DOOR (WP 0011 00).
3.
Remove four screws, washers and front access cover from hull. Use 1/2 inch drive socket wrench handle and 3/4 inch
socket.
