e. Assembly. To assemble the electromagnetic
clutch, refer to figure 4-13 and proceed as follows.
f. Adjustment.
To adjust air gap of
(1) Slide bearings (9) over shaft (8) and secure
electromagnetic clutch, refer to figure 4-14,
with retaining ring 110).
4-35. Replacement of Right-Angle Drive Sprocket.
(2) Install key (7) in shaft (8) and slide shaft (8)
into clutch assembly (6).
for instructions on replacement of right-angle drive
(3) Using spanner wrench 5120-293-0798,
sprocket.
install threaded ring (11 ) in clutch assembly (6).
b. Disassembly. To disassemble the right-angle
(4) Slide bearing (5) over shaft (8) and secure
drive power take-off sprocket, refer to figure 4-15. Drive
with retaining ring (4).
pin from connecting link, separate connecting links, and
remove chain from sprockets.
Note. Refer to lubrication order (LO 9-2590-213-
12) for lubrication of magnetic clutch.
Figure 4-13. Disassembly or assembly of magnetic clutch.
4-26
