Illustration 1
Interchangeable CAN Stones and Holders Machine and portable
Hone attachment sizes from 2-1/2" / Z-11/16 through 21".
Machine use not recommended above 311 except on very light
work.
(1) Assembly of Stones and Guides to the Holders
ready for use. Remove the two
screws on the side of the holder
and insert the stone (guide). Re-
place the screws and tighten
firmly. The screw holes on
the stones and guides are no
in the same position; there-
fore the stones and guides
must be matched to their
proper holders.
Double length holders
are assembled in the same
manner with two stones or
guides for each holder.
Double Length Holder
Illustration 2
13