Assembly of the Holder to the Hone Body

(2) Assembly of the Holder to the Hone Body (Illus.3)

Remove pinion assem-

bly from hone body by

pulling straight out.

Insert holders in the

holes marked x on

hone body, with rack

teeth toward the

pinion hole. Push

all holders into the

body as far as they

Illustration 3

will go and replace

the pinion assembly.

(3) Assembly of Holder Supports (Illus. 4a, 4b). Re-

move pinion assembly by pulling out the hone

body. Slide hone into holder support with

the side of the support marked

top toward the honing machine or driving yoke.

Install stones and guides into the

holes marked x on the body of the

hone. Depress all holders into the

body as far as they will go and in-

sert pinion assembly in the usual

manner.

Holder Support

Illustration 4a