TM 9-4110-254-14
4-42. CONDENSER FAN REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts
General Safety Instructions
Lock Washers (8)
1, Appendix G
WARNING
Marker tags (4)
7, Appendix E
High voltage and exposed rotating parts are
used m the refrigeration unit Personal injury
Equipment Conditions
can result if power is connected
Refrigeration unit shut down (para 2-7) and power
disconnected
Left side door open
a. Removal
(1)
Remove eight bolts (1), lock washers (2) and cover (3) Discard lock washers.
(2)
Loosen two set screws (4)
(3)
Carefully pull condenser fan (5) off fan drive shaft (6)
b. Installation
(1)
Aline and install condenser fan (5) onto fan drive shaft (6).
(2)
Tighten two set screws (4)
(3)
Install cover (3), eight bolts (1), and new lock washers (2)
4-92
