TM 9-4110-255-14
4-49. OIL FILTFR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Wiping Rags
Refrigeration unit shut down (para 2-7) and battery
9, Appendix E
disconnected (para 4-35).
Lubricating Oil
Left side door open.
10, Appendix E
General Safety Instructions:
WARNING
Exposed rotating parts are used in the
refrigeration unit. Personal injury can result if
battery is connected.
a. Removal.
(1) Remove filter element (1) and seal (2). Discard filter element and seal.
(2) Check condition of union (3) and remove if damaged.
b. Installation.
(1) Using wiping rag, clean any oil residue remaining.
(2) Install union (3) if removed.
NOTE
Seal is supplied with new filter element.
(3) Lightly coat new seal (2) with lubricating oil and install onto new filter element (1).
4-119
