TM 9-4110-255-14
4-65. FUEL GAGE REPLACEMENT .
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials / Parts:
Equipment Conditions:
Marker tags (3)
Refrigeration unit shut down (para 2-7) and battery
4, Appendix E
disconnected (para 4-35).
Right side door open.
a. Removal.
(1) Tag wire leads (1).
NOTE
Terminal hardware is supplied with fuel gage.
(2) Remove three nuts (2), and wire leads (1).
(3) Remove three nuts (3), retainer (4), and fuel gage (5).
b. Installation.
CAUTION
Overtightening retainer nuts will cause the retainer to deform and possibly crack or break.
(1) Install fuel gage (5), retainer (4), and three nuts (3) being careful not to over tighten.
(2) Using tags and wiring diagram (fig. 1-4), install wire leads (1) and secure using three nuts (2). Remove
tags.
4-155
