TM 9-4110-255-14
4-67. FUEL TANK REPAIR AND REPLACEMENT.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Materials/Parts:
Materials/Parts:
Nuts (2)
Marker tags (4)
24, Appendix G
4, Appendix E
Ferrule Tubes (2)
Tie Down Straps
25, Appendix G
5, Appendix E
Connectors (2)
Equipment Conditions:
26, Appendix G
Lock Washers (6)
Refrigeration unit shut down (para 2-7) and battery
1, Appendix G
disconnected (para 4-35).
Lock Washers (5)
Both side doors open.
22, Appendix G
Control box cover raised and latched.
a. Repair.
NOTE
Repair is limited to replacement of damaged components.
(1) Fuel Tank Filler Neck.
(a)
Remove cap (1) and unlatch chain (2).
(b)
Remove six screws (3), lock washers (4), and fuel tank filler neck (5). Discard lock washers.
(c)
Install new fuel tank filler neck (5), six new lock washers (4), and screws (3).
(d)
Latch chain (2) in place and install cap (1).
(2) Fuel Level Sender.
(a)
Tag wire leads (6) and remove two nuts (7), wire leads, nuts (8), and flat washers (9).
(b)
Remove five screws (10), lock washers (11), and fuel level sender (12). Discard lock washers.
(c)
Install new fuel level sender (12), five new lock washers (11), a d screws (10).
n
(d)
Using tags and wiring diagram (fig 1-4), install two flat washers (9), nuts (8), wire leads (6), and nuts
(7). Discard tags.
4-159
