TM 9-4110-255-14
5-2. CONTROL BOX COVER REPAIR AND REPLACEMENT . - Continued
Figure 5-1. Control Box Cover Assembly
(3) Be sure that the attaching surface of the control box cover (2) is clean and free of paint and old adhesive
material.
(4) Coat the mating surfaces of the control box cover (2) and gaskets (7), (8), (9), (10), (11), (12), or (13) with
adhesive. Let both surfaces air dry until adhesive is tacky, but will not stick to fingers.
(5) Starting with an end, carefully press gasket (7), (8), (9), (10), (11), (12), or (13) onto control box cover (2).
Press firmly overall to ensure complete contact.
c. Installation.
(1) Install data plates (4), (5), and (6) and secure using 12 rivets (3).
(2) Install control box cover (2) and secure using 11 rivets (1).
5-4
