TM 9-4110-255-14
5-23. CONDENSER COIL REPLACEMENT . - Continued
WARNING
Coil fins are sharp and can cut hands or fingers. Wear gloves to prevent personal injury when
handling coil.
(3) Remove six self locking nuts (6), bolts (7), flat washers (8), condenser coil (5), and condenser shroud (9).
Discard self locking nuts.
b. Installation.
WARNING
Coil fins are sharp and can cut hands or fingers. Wear gloves to prevent personal injury when
handling coil.
(1) Install condenser shroud (9), condenser coil (5), six flat washers (8), bolts (7), and new self locking nuts (6).
(2) Purge (para 5-11) and braze (para 5-12) two fittings (4) onto condenser coil (5).
(3) Aline clamps (3) then install flat washer (2) and bolt (1).
NOTE
FOLLOW-ON MAINTENANCE:
Install condenser coil guard (para 4-14).
Replace dehydrator (para 5-17).
Leak check (para 5-13), evacuate (para 5-14), and charge (para 5-15) the refrigeration system.
Close both side doors.
5-44
