TM 9-4110-255-14
b. Installation.
(1) Purge para 5-11) and braze (para 5-12) two fittings (5) onto pressure regulator valve (6).
(2) Install clamp (4) onto pressure regulator valve (6) and aline clamp. Install new lock washer (3) and
bolt 2)
(3) Install insulation (1) and secure with insulation tape as necessary.
Figure 5-21. Pressure Regulator Valve
NOTE
FOLLOW-ON MAINTENANCE:
Replace dehydrator (para 5-17).
Leak check (para 5-13), evacuate (para 5-14), and charge (para 5-15) the refrigeration system.
Close left side door.
5-47
