TM 9-4110-256-14
4-44.
GASKET (HEAT SHIELD) REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
General Safety Instructions:
Equipment Conditions:
disconnected.
WARNING
Refrigeration unit removed from refrigerator
High voltage and exposed rotating
Materials/Parts:
parts are used in the refrigeration unit.
Silicone RTV
Personal injury can result if power is
connected.
Gasket
Gasket
Gasket
Gasket
a. Removal.
NOTE
Remove only the individual gasket pieces that need to be replaced.
(1) Remove nine screws (1), one each gasket retainer strips (2) and (3), and top outside gasket (4). Repeat for
bottom outside gasket.
(2) Remove eight screws (1), two gasket retainer strips (2), and top inside gasket (5). Repeat for bottom inside
gasket.
(3) Remove 12 screws (1), three gasket retainer strips (2), and right inside gasket (6). Repeat for left inside gasket.
(4) Remove 13 screws (1), two gasket retainer strips (2), one gasket retainer strip (3), and right outside gasket (7).
Repeat for left outside gasket.
4-92