TM 9-4110-258-13
Figure 4-24. Push Switches
(2) Tag and disconnect wire leads (2).
(3) Remove two self locking nuts (4), flat washers (5), bolts (6), and push switch (3). Discard self locking nuts.
c.
Installation.
(1) Install push switch (3), two bolts (6), flat washers (5), and new self locking nuts (4).
NOTE
Smaller diameter sleeving insulation must go over wire lead connecting to push switch terminal C.
(2) Install insulation sleeving (1) over wire leads (2).
4-67
