TM 9-4110-258-13
4.31 V-BELT REPLACEMENT AND ADJUSTMENT.- Continued
(4) If the V-belt (3) tension cannot be adjusted within the range of motor mount plate (2) travel, loosen four bolts (15)
and slide AC motor (13) on motor mount plate as necessary. Be sure pulley (4) and sheave (11) are aligned and
tighten four bolts. Repeat above step to adjust V-belt tension.
(5) Turn self locking nut (14) counterclockwise against motor mount plate (2).
Figure 4-25. V-Belt
NOTE
FOLLOW-ON MAINTENANCE:
Close left side door.
Close front door.
Connect power and put unit back into service.
4-70
