TM 9-4120-371-14
(5) Using screwdriver, loosen four captive panel fastener screws in junction box cover.
(6) Remove junction box cover.
b. Reassemble
(1)
Place junction box cover on box and aline hardware.
(2)
Using screwdriver, secure junction box cover with four captive panel fastener screws.
Insert bottom flange of lower front panel inside the lip of the cabinet base.
(3)
(4)
Push top of lower front panel into position.
(5)
Using screwdriver, secure lower front panel with two captive panel fastener screws.
(6)
Connect power cable.
(7)
Turn on power at power source.
