TM 9-4120-371-14
c. Repair
(1) See paragraph 4-37 for general wire repair instructions.
(2) See table 4-3 (Wire List) for wire lengths and terminal connector information.
(3) After repairs are complete, place junction box cover on box and aline hardware.
(4) Using screwdriver, secure junction box cover with four captive panel fastener screws.
Follow-on procedure: Install junction box. (See para 4-47.)
4-51. TRANSFORMER (T1)
Preliminary procedure: Remove junction box cover. (See para 4-48.)
a. Removal
(1) Tag and disconnect wire leads.
(2) Using wrench, remove four nuts and lock washers from transformer mounting studs.
(3) Remove transformer and gasket.
