TM 9-4120-378-14
4.27 COMPRESSOR START RELAY - Continued
Remarks
Action
Location/ltem
a. Using tags as a guide, connect electrical leads
Installation
(4), (5), and (6) to the compressor start relay (K5)
(3) and remove tags.
Silicone Adhesive Sealant RTV, Type 1,
MI L-A-46106, releases acetic acid during
application and curing. Use in well-venti-
lated area to stay below 10 ppm acetic
acid. Avoid prolonged skin contact, pro-
longed inhalation of vapors, and eye
contact.
b. Coat the terminals and electric leads (1) with 1/8
inch of silicone adhesive sealant RTV (Item 1,
c. Install the compressor start relay (K5) (3) using
screw (1) and Iockwasher (2) through mounting
tab.
See paragraph 4.17.
d. Install rear and center top covers.
