TM 9-4120-378-14
4.40 HOUSING-INSPECT/SERVICE. This task covers inspection and service,
INITIAL SETUP
MateriaI/Part:
Dry cleaning solvent (Item 16, Appendix E)
Remarks
Action
Location/Item
Disconnect air conditioner power supply
before doing maintenance work on the
electrical system.
Clean parts in well-ventilated area. Avoid
inhalation of solvent fumes and pro-
longed exposure of skin to cleaning sol-
vent, P-D-680, used to clean parts,
which is potentially dangerous to person-
nel and property. Avoid repeated and
prolonged skin contact. Do not use near
open flame or excessive heat. Flash
point of solvent is 100F to 138F (38C
to 59C).
Visually inspect the housing for cleanliness, nicks,
Inspection
gouges, dents, bare spots in paint or other defects.
a. If cleaning is required. Wipe off dirt or arime with
Service
a cloth moistened with dry cleaning solvent (Item
16, Appendix E).
b. Report any necessary repairs to general mainte-
nance personnel.
4-108
