TM 9-4120-378-14
4.42 INSTALLATION HARDWARE-INSPECT/REPLACE.
This task covers removal, inspection and installation.
Location/ltem
Action
Remarks
Disconnect air conditioner power supply
before doing maintenance work on the
electrical system.
Remove four screws (1) and flat washers (2)
Removal
a,
from bottom of air conditioner and enclosure
mounting plate (6).
b.
Remove four resilient mounts (3), four elastomer-
ic tubes (4) and four spacers (5) from bottom of
enclosure mounting plate (6).
Remove air conditioner from atop of four remain-
c.
ing resilient mounts (3) and the enclosure
mounting plate (6).
d.
Remove the remaining four resilient mounts (3)
from atop of enclosure mounting plate (6).
damage.
b. Inspect eight resilient mounts (3), four elasto-
meric tubes (4) and four spacers (5) for damaged
or worn out conditions.
4-112
