TM 9-4120-378-14
4.42 INSTALLATION HARDWARE.- Continued
Remarks
Action
Location/Item
c. Replace damaged hardware.
Inspection
. Continued
a. Assemble onto each of four screws (1), a flat
Installation
washer (2), a spacer (5), an elastomeric tube (4)
and a resilient mount (3).
b. Install the above screws, flat washers, spacers,
elastomeric tubes and resilient mounts through
the bottom of enclosure plate and then install one
additional resilient mount (3) on each of the four
screws (1), on top of the enclosure mounting
plate (6).
c. Aline the air conditioner on top of the resilient
mounts (3) and screws (1), which attach the air
conditioner to the enclosure mounting plate (6).
d. Tighten the screws (1) into the bottom of air con-
ditioner.
4-113
