TM 9-4120-378-14
5.15 CONDENSER FAN MOTOR. - Continued
Location/ltem
Action
Remarks
disassembly
Continued
d.
Using a rawhide mallet or plastic bar and hammer,
tap the rear end plate (1) away from housing (2).
Use caution not to damage wiring.
Pull out the rotor (4), with bearings (5) from end
e.
plate (1).
Remove bearings (5) from rotor (4). Retain the
shims (6) and spring (7) for use at reassembly if they
are in good condition.
Dry cleaning solvent (Appendix E,
Item 16) used to clean parts is poten-
tially dangerous to personnel and
property. Avoid repeated and pro-
longed skin contact. Do not use near
open flame or excessive heat. Flash
point of solvent is 1000 F (38 C -
59 C).
5-47
