TM 9-4120-378-14
5.14 INFORMATION PLATES. - continued
Remarks
Action
Location/Item
Vent Open
Decal
a.
Installation
Remove paper from back of new vent open decal
(10) and expose sticky surface.
b.
Aline decal (10) to proper position on housing
(above vent damper actuator wheel) and press in
place.
Vent Closed
Decal
Remove paper from back of new vent closed decal
a.
Installation
(9) and expose sticky surface.
b.
Aline decal (9) to proper position on housing (be-
neath vent damper actuator wheel) and press in
place.
Identification
Plate
Disconnect air conditioner power sup-
ply before doing maintenance work on
or near electrical components or junc-
tion box compartment.
a.
Installation
Aline identification plate (2) onto housing in proper
position.
Be careful not to damage internal com-
ponents of junction box compartment
when installing identification plate.
b.
Secure identification plate (2) to housing using four
rivets (1).
c.
Install junction box (15). (See paragraph 4.25.)
d.
Install front top cover (20). (See paragraph 4.17.)
5-43
