TM 9-4120-378-14
5.15 CONDENSER FAN MOTOR-REPAIR . This task covers disassembly, cleaning, inspection and reassembly.
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Rear top cover removed (paragraph 4.17)
Dry cleaning solvent (Appendix E, Item 16)
Condenser fan motor removed (paragraph 4.36)
Cloth, lint-free (Appendix E, Item 9)
Oil (Appendix E, Item 14)
Special Tool:
Plastic bar or rawhide mallet
Location/Item
Remarks
Action
Disconnect air conditioner power sup-
ply before doing any maintenance
work on the electrical system.
disassembly
Match-mark the end plate (1) and motor housing
a.
(2) to ease reassembly.
b.
Remove screws (3) from the end plate (1) on mo-
tor.
c.
Remove plastic nut from end plate (1) on wiring.
Remove the rear end plate carefully to
avoid damaging wires. Wires may be
left in place if care is taken to avoid
damaging them.
