TM 9-4120-385-14
4-20. JUNCTION BOXContinued
a.
REMOVAL.
Disconnect power supply.
1.
2.
Loosen four captive screws retaining junction box cover. Remove cover to gain
access to electrical components.
Remove and tag all leads from circuit breaker (Fig 4-22, item 5).
3.
4.
Remove four screws (1) and lockwashers (2) and circuit breaker (5).
Remove two screws (3) and lockwashers (2) and cover (6).
5.
6.
Remove guard (4) by compressing outside and pulling in through hole.
Using a center punch, drive out circuit breaker handle shaft and remove arm.
7.