TM 9-4120-385-14
28. Install cover and fasten four captive screws.
29. Carefully slide junction box into casing.
30. Secure junction box with four captive screws.
31. Install circuit breaker actuator. Refer to Paragraph 4-21.
32. Install control panel. Refer to Paragraph 4-18.
4-21. CIRCUIT BREAKER RESET CONTROL
This task covers:
a . Removal
b. Cleaning (service)
c. Inspection
d. Replacement
INITIAL SETUP
Equipment Condition
Canvas cover and lower panel removed (Para 4-10)
Materials/Parts
Cleaning Cloths
a.
REMOVAL. See Figure 4-29.
