TM 9-4120-385-14
INSTALLATION.
d.
Mount relay (K7) (Fig 4-30, item 6) to bracket (2) with three screws (3), flat
1.
washers (5), and nuts (4).
Connect all leads to relay. Refer to wiring diagram FO1.
2.
Mount bracket (2) to rear panel using four screws (1).
3.
Mount relay (K10) (Fig 4-31, item 68) to bracket (50) with screw (53).
4.
Mount capacitor (C2) (67) with clamp (66) and four screws (13) and nuts (19).
5.
Attach resistor (56) to capacitor (C4) (57).
6.
Slide two clamps (54) onto capacitor (C4) (57) and secure with one screw (53)
7.
and nut (12) each.
8.
Connect all leads to relay (68) and capacitors (55 and 67). Refer to wiring
diagram FO-1.
Mount bracket (50) to inside left wall using four screws (3).
9.
10.
Install condensate drain line. Do not secure loop clamp.
11. Install left mounting bracket.
12.
Secure
loop
clamp.
