TM 9-4120-385-14
16. Debraze sight glass (6) from connecting tubing and remove from unit.
CAUTION
b.
INSTALLATION.
1.
Braze sight glass (6) to tubing.
2.
3.
4.
Install back panel.
5.
6.
Install fresh air inlet screen.
7.
Install CBR inlet cover.
8.
Install fan guard.
9.
Install grounding stud wire.
10. Install high and low reset panel.
11. Install control knob.
12. Install screws for external power connector.
13. Install sight glass bracket (7) with two screws (1), lockwashers (2), and flat
washers (3).
14. Install screws for outside thermostat.
15. Install top panel and secure with 11 screws and rain seal washers.
16. Install canvas cover and secure with 16 screws and rain seal washers.
17. Connect power supply.
5-84