TM 9-4120-399-14
b. Test.
(1) Refer to wiring diagram on Figure 1-4 and use a multimeter to test the conductors
(2) Replace any conductor found discontinuous.
c. Installation.
(1) Install cable ties as needed to hold wiring together.
(2) Install cable assemblies (1), (2), and (3) to junction box assembly (4).
(3) Tighten three nuts (5) on three connectors (6).
(4) Connect ends of cable assemblies (1), (2), and (3) to inside junction box assembly
(4) and remove tags.
4-92