TM9-4120-400-14
INFORMATION PLATES. - continued
4-15.
INSPECTION
Replace any plate that is damaged, missing, or illegible.
REMOVAL
Remove old plate by drilling out drive screws. Use drill stop or similar tool to avoid damage to internal parts.
INSTALLATION
Install new plate with drive screws.
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
MIST ELIMINATOR.
d. Installation
c. Inspection
b. Cleaning
This task covers:
a. Removal
INITIAL SETUP
Tools
Equipment
Condition
Disconnect power at power source.
Refrigeration Unit Service Tool Kit
Appendix B, item 1
General Safety Instructions
Scrub Brush
Appendix B, item 2
Materials/Parts
Dry cleaning solvent used to clean parts is potentially
Dry cleaning solvent
dangerous to personnel and property. Do not use near
Appendix E, item 3
open flame or excessive heat. Use in well ventilated
Detergent
area.
Appendix E, item 15
4-47
