TM 9-4120-401-14
SUPPLY AIR LOUVER.
f. Adjust
e. Install
d. Replace
c. Inspect
a. Remove
b. Clean
This task covers:
INITIAL SETUP
Tools
Equipment Conditions:
Refrigeration Unit Service Tool Kit
Appendix B, item 1
Scrub Brush
Use disconnect switch (NOT POWER
Appendix B, item 2
CABLE) to disconnect power to unit.
Damage to cable connector pins will
Materials/Parts
result if cable is used.
Lock washers (8)
Disconnect power at power source.
Rags
Appendix E, item 13
Dry Cleaning Solvent
Appendix E, item 3
Detergent
Appendix E, item 15
Figure 4-17. Supply Air Louver
a. Remove.
Remove eight sets of screws (1) and lock washers (2). Remove louver (3).
