TM 9-4120-401-14
5 - 2 5 . SOLENOID VALVE (L1). - continued
(3) Remove two screws (8), lock washers (9), flat washers (10), and spacers (11).
(4) Debraze tubing (12) and remove valve body (13). (See paragraph 5-14.)
( 5 ) Disassemble new solenoid valve (L1). Remove two screws (4), tube and plunger assembly (5), O-ring
(6), and diaphragm (7) from valve body (13).
( 6 ) Install new flush bushings (14) into valve body (13) and place valve body on tubing (12).
( 7 ) Braze tubing joints (12) and flush bushings (14) to valve body (13). (See paragraph 5-14.)
( 8 ) Secure valve body (13) to housing with two screws (8), lock washers (9), flat washers (10), and
spacers (11).
(9) Assemble diaphragm (7), O-ring (6), and tube and plunger assembly (5), Secure with two screws (4).
(10) Install coil (3) and data plate (2). Secure with nut (1).
NOTE
FOLLOW-ON MAINTENANCE:
Install new refrigerant desicant dehydrator (para 5-22).
5-62
