TM
9-4120-401-14
This task covers:
a. Test
b. Replace
INITIAL SETUP
Equipment Condition
Tools
Refrigeration Unit Service Tool Kit
Use disconnect switch (NOT POWER
CABLE) to disconnect power to unit.
Damage to cable connector pins will
result if cable is used.
Disconnect power from power source.
a. Test.
b. Replace.
(3) Debraze tube or loosen fitting connections and remove part from unit. (See paragraph 5-14.)
(4) Place new part in unit on the tube/fitting ends. Braze or tighten the connections. (See
NOTE
FOLLOW-ON MAINTENANCE:
5-83 / (5-84 blank)