TM 9-4120-402-14
5-7. INFORMATION PLATES.
This task covers: Replace
INITIAL SETUP
Tools
Equipment Condition
Refrigeration Unit Service Tool Kit
CAUTION
Rivet Gun
Use disconnect switch (NOT
POWER CABLE) to disconnect
power to unit. Damage to cable
Materials/Parts
connector pins will result if cable is
used.
Rivets
Disconnect power at power source.
NOTE
See figure 2-17 for location and information contained on Warning and instruction plates.
Replace.
(1)
Remove old plate by drilling rivets out. Use a drill stop or similar tool to avoid damage to internal parts.
(2)
Install new plate with proper size rivets.
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
5-12