TM 9-4120-403-14
(4)
If meter displays high resistance and remains there, the capacitor is internally shorted and must be replaced.
(5)
If the meter does not show any resistance, the capacitor is open and must be replaced.
Figure 4-45. Compressor Motor Start Capacitor (C4)
Removal
(1)
Tag and disconnect wire leads.
(2)
Loosen two screws and remove capacitor from clamps.
Installation
(1)
Install capacitor in clamps.
(2)
Tighten two screws in clamps.
(3)
See tags and wiring diagram (fig. 4-43), connect wire leads, and remove tags.
(4)
Cover terminals with sealant
Follow-on procedure:
Install junction box. (See para 4-32.)
4-124
