TM 9-4120-403-14
(3) A good capacitor will be shown by meter quickly registering high re istance, then slowly backing off to zero
s
resistance.
(4)
If meter displays high resistance and remains there, the capacitor is internally shorted and must be replaced.
(5)
If the meter does not show any resistance, the capacitor is open and must be replaced.
Figure 4-46. Fan Motor Capacitor (C1)
Removal
(1)
Remove nut and data plate from solenoid valve L1.
(2)
Remove L1 coil assembly and set aside.
(3)
Tag and disconnect wire leads on capacitor (C1).
(4)
Remove four screws in casing that secure capacitor bracket.
(5)
Remove bracket.
(6)
Remove two screws and locknuts that secure retaining strap to bracket.
(7)
Remove strap.
4-126