TM 9-4120-405-13&P
4-26. FENDER (Figure 4-17).
This Task Covers:
a. Replace
b. Repair
Initial Setup:
Tools Required
Tool kit, general mechanics
Equipment Condition
Accessory box removed, paragraph 4-21
Data plates removed, paragraph 4-27, as required
REMOVAL.
1. Remove four nuts (1), eight flat washers (2), two spacers (3), and four bolts (4).
2. Remove four nuts (5), eight flat washers (6), and four bolts (7).
3. Remove fender (8).
REPAIR.
Repair is limited to straightening bends and dents.
INSTALLATION.
1. Position fender (8) on trailer.
2. Install four bolts (7), eight flat washers (6), and four nuts (5).
3. Install four bolts (4), two spacers (3), eight flat washers (2), and four nuts (1).
4. Install data plates, paragraph 4-27, as required.
5. Install accessory box, paragraph 4-21.
4-41
