TM 9-4120-407-14
Table 3-2. Unit Preventive Maintenance Checks and Services for Model F36T-MPI - Cont
Location
Not Fully Mission Capable
Procedures
Item
Item To
Interval
if:
Check/Service
No
Fabric Cover - Cont If fabric cover (3) is dirty, clean
Annually
5
it per the following:
(1) Remove the fabric cover per
(2) Mix a small quantity of
detergent
(Item 13, Appendix E) with
clean water to make a wash
solution.
(3) Dampen a rag
(Item 12, Appendix E) with
wash solution and clean the
fabric cover. Carefully use a
scrub brush
(Item 2, Appendix B) to
remove any caked on dirt or
deposits.
(4) Dampen a rag with clean
water and rinse the fabric
cover. Rinse rag in clean
water and continue until all
detergent residue has been
removed.
(5) Wipe the fabric cover with
a clean dry rag until it is
thoroughly dry.
(6) Install the fabric cover per
If turnbutton fasteners (1) bind
when turned, lubricate them
per the following:
(1) Apply a small amount of
lubricating oil
(Item 15, Appendix E) to the
pivot points and move the
turnbutton fasteners to work
it into the joint.
(2) Blot or wipe all excess
lubricating oil from the
turnbutton fasteners using a
clean dry rag
(Item 12, Appendix E).
3-23
