TM 9-4120-408-14
5-11. SWIVEL TEE ACCESS VALVE AND FLARE TEE MAINTENANCE.
This task covers:
Removal
Install
Inspect
INITIAL SETUP:
Tools
Materials/Parts (Continued)
Tool Kit, Service Refrigeration Unit.
Flux, Appendix E, Item 11
Nitrogen, Appendix E, Item 18
Recovery and Recycling Unit, Refrigerant,
Dehydrator, Appendix G, Item 2
Lock Washers, Appendix G, Item 14
Regulator, Nitrogen, Appendix B, Section III,
Item 9
Refer to TM 9-4120-408-24P for part numbers
Manifold Gage, Charging and Testing,
of items to be replaced.
Leak Detector, Appendix B, Section III,
Equipment Conditions
Item 17
Air Conditioner shut down, paragraph 2-5.
Materials/Parts
Condenser Assembly removed, refer to
Brazing Alloy, Appendix E, Item 5
applicable system technical manual.
Brazing Alloy, Appendix E, Item 6
Tetrafluoroethane, Appendix E, Item 9
General Safety Instructions
Do not work on equipment without following
standard shop safety precautions.
Figure 5-6. Swivel Tee Access. Valve and Flare Tee Maintenance.
Change 1
5-24
