TM 9-4120-408-14
This task covers:
Inspect
Remove
Test
Install
Adjust
INITIAL SETUP:
Materials/Parts (Continued)
Tools
Refer to TM 9-4120-408-24P for part numbers of items
Section III, Item 1
to be replaced.
Equipment Conditions
Item 7
Power disconnected,
refer
to
applicable
system
technical manual.
Section III, Item 16
Wiring
Harness
Electrical
Leads
Materials/Parts
Electrical Leads disconnected as required, paragraph 4-
17.
General Safety Instructions
Do not work on equipment without following standard
shop safety precautions.
Ensure that power has been disconnected before
performing maintenance on electrical components.
WARNING
Do not work on equipment with
power connected. Electrocution
hazard is present. Failure to obey
this warning may result in death
or serious personal injury.
Change 1 5-19