TM 9-4120-408-14
Figure F-7. Wiring Harness A105J2.
PROCEDURES:
a. Refer to Figure H-1 and determine faulty wire.
b. Remove faulty wire from wiring harness.
c. Refer to table F-13 to determine wire and cut wire to dimensions shown in Figure F-7.
d. Refer to tables F-12 and F-13 to assemble wire. Mark wire with from to termination designations and double
headed arrow on each end of wire assembly.
e. Install wire in connector (1).
h. Install tiedown straps at 3.00 inch maximum intervals and at each breakout.
F-14
