TM 9-4910-387-14-1
REMOVAL
1
TWO NUTS (1), TWO WASHERS
(2), AND TWO SCREWS (3). Remove
using two 7/16-in. open end
wrenches (4).
2
ACCUMULATOR ASSEMBLY (5).
Pull forward so six hoses (6) slide
through plate (7).
CAUTION
3 SIX HOSES (6) WITH SIX MALE
HOSE FITTINGS (8). Remove from
Be careful when using slip
accumulator assembly using 7/16-in.
joint pliers so no damage
open end wrench (4) and slip joint
to hoses occurs. Apply
pliers (9).
only enough pressure to
prevent hoses from
4 ACCUMULATOR ASSEMBLY (5).
slipping.
Remove.
4-45
