TM 9-4910-387-14-1
REPAIR
2
SUPPORT BLOCK (5).
a.
Remove two nuts (2), two
washers (3), and two screws (4).
NOTE
Repair is by replacement
b.
Remove.
of authorized parts (TM 9-
4910-387-24P) as required.
3
BOLT (6).
a.
Loosen nut (7).
b.
Remove.
REASSEMBLY
1
BOLT (1). Install loosely into support
block (2).
2
SUPPORT BLOCK (2).
a.
Position on plate (3).
3 PIVOT BLOCK (7).
b.Install two screws (4), two
washers (5), and two nuts (6).
4-47
