TM 9-4910-387-14-1
4-16. ACCUMULATOR ASSEMBLY - MAINTENANCE INSTRUCTIONS
THIS TASK COVERS:
a.
Removal
d. Repair
b.
Disassembly
e. Reassembly
c.
Inspection/servicing
f. Installation
INITIAL SETUP
Tools and Special Tools
References
TM 9-4910-387-24P
Materials/Parts
Equipment Conditions
Cleaning compound (item 3, app C)
Main power source to tester is turned off
Rag (item 14, app C)
REMOVAL
2
ACCUMULATOR ASSEMBLY (5).
Pull forward so six hoses (6) slide
through plate (7).
CAUTION
Be careful when using slip
joint pliers so no damage
to hoses occurs. Apply
only enough pressure to
prevent hoses from slipping.
3
SIX HOSES (6) WITH SIX MALE
1
TWO NUTS (1), TWO WASHERS
HOSE FITTINGS (8). Remove from
(2), AND TWO SCREWS (3). Remove
accumulator assembly using 7/16-in.
using two 7/16-in. open end
open end wrench (4) and slip joint
wrenches (4).
pliers (9).
4-50