TM 9-4910-387-14-2
6-2. TROUBLESHOOTING (cont) 1
H. WIRES MAY BE OPEN. (cont)
8 Remove both leads. Connect
one multimeter lead to the
STOP switch contact (23).
Connect other lead in sequence
to terminals B3 (24), B7 (25),
A7 (26), and to starter contact
L2 (27).
I.
WIRE MAY BE OPEN FROM
STARTER TO MAIN DRIVE
J.
MAIN DRIVE MOTOR MAY BE
MOTOR.
DEFECTIVE.
9
Check for continuity. If continuity
checks determine there is an open
wire, replace the wire (p 6-219).
Refer to page 6-20 for troubleshooting
Refer to page 6-22 for troubleshooting
procedures.
procedures.
10
If main drive motor fails to start, pro-
ceed to step I.
6-30
